Most Powerful Best Risers For Mining For 2022

Are you looking for the most reliable and efficient risers for mining in the market? If the answer to the question is yes, then you are in luck because your good luck has brought you to the best possible place. We are here to save your time and relieve you of the stress of going through a plethora of reviews.

It is quite a common phenomenon to be confused over which is the risers for mining to buy. This dilemma arises due to the existence of various types of risers for minings that are present in the market.  To reduce your conundrum, we have prepared a comprehensive guide of how you may pick the best risers for minings available in the market.

Our Recommended 10 Best risers for mining in 2022

SaleBestseller No. 1
Ubit 6 Pack Latest PCI-E GPU Riser Express Cable 16X to 1X (6pin / MOLEX/SATA) with Led Graphics Extension Ethereum ETH Mining Powered Riser Adapter Card
  • Slot color is sent randomly:Due to the shortage of raw materials, we have purchased the 2 color card slot for production, randomly send, it does not affect the riser's function.
  • More Port option: molex, SATA and Graphic card 6PIN interface, three interface optional. The top of the line solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin), whether small open air rigs or large rack based miners, and securing your investment.
  • LED indicator and fuse are used on the board: Indicates the connection status between your devices.
  • 3 Solid Capacitors deliver power to Graphics stably and Added coil to prevent interference,Long time work will produce electromagnetic waves,affecting transmission,This special coil unit absorbs this electromagnetic wave.
  • 60cm USB 3.0 cable, very soft and easy to place and route. Cable with shield net inside is more stable for mining. PCI-E 1x to 16x powered riser adapter card with multi-layer shielded wire will not weaken the signal within 3 meters.
Bestseller No. 2
Ziyituod 6 Pack PIC-E Riser Express Cable VER010S GPU Riser Express Kits ,with Led Graphics Extension Ethereum ETH Mining Powered Riser Adapter Card+60cm USB 3.0 Cable
  • 【VER010S-Plus】VER010S-Plus Version PCIe riser kit are the best solution for setting up Ethereum/Bitcoin and other GPU mining rigs.
  • 【Stable and Safe】: The graphics card power supply adopts 8 imported large solid capacitors to make the graphics card power supply more stable and safe.
  • 【Riser Adapter Card】: Two 6PIN+MOLEX interface to enhance the power supply capacity, so that the power supply of the graphics card is independent of the motherboard, thereby reducing the burden on the connection between the motherboard and multiple graphics cards.
  • 【Rugged Cable】: The PCI-E connector uses multi-layer shielded wire, which can be connected to up to 3M without signal attenuation. The 60CM USB cable is soft and stable, and the graphics card can be placed at will.
  • 【WIDELY APPLICABLE】: Suitable for all Window systems, LINUX and MAC.
SaleBestseller No. 3
FebSmart PCI-E Riser for Bitcoin Litecoin ETH Coin Mining 6 PIN Powered PCIE Extension Cable GPU Riser Ethereum Mining ETH GPU Extension Cable PCIEX1 to PCIE X16 VER006C GPU Riser(Blue 6-PCS)
  • 1.Feb Smart VER006C high performance PCI Express riser can extend the mother board PCIE X1 slot to PCIE X16 slot. Will provide a safe and reliable connectivity with more PCIE X16 graphic cards. Will be mainly used on Ethereum Mining rigs or GPU Mining rigs.
  • 2. Designed 3X high performance solid capacitors,1X voltage transformer and 1X Inductance to make sure voltage and current supply stable. Build in electric circuit protector keep device away from over current, over heat and over voltage.
  • 3. Packed 23.6-inch USB 3.0 extension cable for flexible Graphic card connectivity. Equipped 15Pin SATA to Molex 6Pin power cable provide adequate current for miner rigs GPUs.
  • 4. Simple extend PCI Express X1 slot from mother board to PCI Express X16 slot for heavy GPUs. Added fixed buckle on the PCI Express X16 slot ensure stable GPU connection.
  • 5. Excellent choice for mining rigs. Buy with 30 days warranty. WARNNING:If the PCIE X1 Connector Inserted Reversely, May Damage the Connected GPUs or PCIE Slots.
SaleBestseller No. 4
6 Pack PCIE Riser Express Cable 16X to 1X (6pin/ MOLEX/ SATA Powered) with LED Graphics Extension, USB 3.0, Ethereum ETH Mining Powered, GPU Riser Adapter PCIE Extender for Bitcoin Litecoin Mining
  • 【VER 009S UPGRADED RISERS】N N.ORANIE VER009S high performance PCIe Express riser can extend the mother board PCIE X1 slot to PCIE X16 slot. Will provide a safe and reliable connectivity with more PCIE X16 graphic cards. Will be mainly used on Ethereum Mining rigs or GPU Mining rigs. Version 009S riser kits are the newest and top of the line solution for setting up GPU mining rigs.
  • 【STABLE and SAFE】Features 4 high quality black solid capacitors to make the power deliver from graphics card more secure and stable. Build in electric circuit protector keep device away from over current, over heat and over voltage.WARNNING: If the PCIE X1 Connector Inserted Reversely, May Damage the Connected GPUs or PCIE Slots.
  • 【REDUCE MOTHERBOARD BURDEN】6-pin PCI-E power to 15-pin SATA power cable for direct connection to your power supply reduces the power burden on your motherboard and ensures maximum compatibility with your power supply.
  • 【STABLE CABLE】60cm USB 3.0 cable, very soft and easy to place and route. Cable with shield net inside is more stable for mining. PCI-E 1x to 16x powered riser adapter card with multi-layer shielded wire will not weaken the signal within 3 meters.
  • 【WIDELY APPLICABLE】Excellent choice for mining rigs. Suitable for all Window systems, LINUX and MAC.And use it Mine Bitcoin, Etherium, Dogecoin, Shiba Inu coin.
SaleBestseller No. 5
Ubit 【8 Pack】 PCI-E Riser for Bitcoin Litecoin ETH Coin Mining Dual-6PIN+MOLEX Powered PCIE Extension Cable GPU Riser PCIEX1 to PCIE X16 GPU Riser
  • More Power Options: MOLEX, SATA and Graphic card 6PIN interface, three interface optional. Reducing the burden on the connection between the motherboard and graphics cards. Compatible with all power supply ports.whether small open air rigs or large rack based miners, and securing your investment. The top of the line solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin).
  • 【Anti-interference metal shell】PCI Express risers extend the mother board PCIE X1 slot to PCIE X16 slot. Provding a safe and reliable connectivity with more PCIE X16 graphic cards. Used on Ethereum Mining rigs or GPU Mining rigs mainly. X16 GPU slot come with Anti-interference metal shell make sure data transmission.
  • Packed 23.6-inch USB 3.0 extension cable for flexible Graphic card connectivity.
  • 5X high quality capacitors GPU RISER, The appropriate number of capacitors results in less electrical fluctuations without increasing power consumption, meaning more stable currents transient- the loads and heat losses spread across multiple cap which will prolong their life, better protect your device away from over current, heat and voltage.
  • Mini design, space saving, give your mining equipment more space for heat dissipation.
SaleBestseller No. 6
2Pack NGFF M.2 to USB pcie Riser Adapter Mining Card, Adapter Card Riser molex Power Cable Adapter for BTC
  • Tentoku Convert M.2 M Key NGFF to USB interface,Use of this adapter can be PCIe 1X interface., no extra power cable needed.
  • Only Support the M.2 NGFF slot of the PCI-E channel. M.2 Specification Revision 0.9-3 Serial ATA Spec. Reversion 3.2 Support 2240/2260/2280 type M.2 SSD module slot.
  • Support System: Compatible with all WINDOWS systems, LINUX MAC
  • The board has three fixed holes, respectively 22 * 42mm, 22 * 60mm, 22 * 80mm, according to the length of your machine inside the card slot, you can break the positioning. Be sure to note that after the break does not support the return, be sure to be able to use to break!
  • We attached great importance to the cooperation with every customer. any questions, please feel free to contact me. have a great day!
SaleBestseller No. 7
BTBcoin PCI-E Riser 009S GPU Riser Adapter Card PCIE X1 to X16 Extender PCI-Express Riser Cable for Bitcoin Litecoin ETH Coin Mining - 6 Pack
  • UPGRADED RISERS: The 009S version PCI-E risers are the solution that most crypto miners select for setting up Ethereum/Bitcoin/Litecoin and other GPU mining rigs. Adopting gold plated contacts to ensure flawless connectivity and long lifespan.
  • MORE STABLE: Features 4 high quality black solid capacitors to make the power deliver from graphics card more stable and secure.
  • REDUCE MOTHERBOARD BURDEN: With two 6 PIN interfaces (directing differently) and one 4 PIN interface to enhance power delivery, providing independent power for graphic card and greatly reduce motherboard burden when using multiple graphic cards.
  • THOUGHTFUL DESIGN: 60cm USB 3.0 extension cable is soft and easy to place and route. 3 LED lights display working state. Features a fixed buckle on slot, easy to remove and fix graphics card so that the card will not fall off from the slot.
  • WIDELY APPLICATIONS: This GPU riser kit is compatible with 1x, 4x, 8x, 16x PCI-E slot of the motherboard. Suitable for all WINDOWS, LINUX and MAC systems. Buy with 30 days warranty.
SaleBestseller No. 8
Miertou VER010S-Plus High Power PCI-E Riser 16x to 1x for Bitcoin ETH Coin Mining,Powered Riser Adapter Card, 4 Solid Capacitors,GPU Crypto Currency Mining Cable with USB Power Cable,with LED
  • Miertou VER010S high-performance PCI-E express riser can extend the motherboard PCIEX1 slot to PCIEX16 slot. Will provide a safe and reliable connection with more PCIEX16 graphics cards. It will be mainly used for Ethereum mining rigs or GPU mining rigs.
  • The graphics card power supply adopts 8X solid capacitors to make the graphics card power supply more stable and safer. The extension cable with 6-pin port enhances the power supply and completely solves the problem of insufficient power supply capacity and cable burning.
  • The slot fixing bracket is designed to remove and set up the graphics card. The card will not fall off from the slot. It can be converted into a SATA port and a SATA to 6pin line, so that the power supply of the graphics card is independent of the motherboard.
  • 60cm USB3.0 cable, very soft, easy to place and route. Cables with built-in shielding nets are more stable. PCI-E1x to 16x power riser adapter card with multi-layer shielded cable will not weaken the signal within 3 meters.
  • After-sales service: If you have any questions, please feel free to contact us! , we will reply to you within 24h!
SaleBestseller No. 9
Dracaena 6 Pack PCIE Riser Adapter Card for GPU Crypto Mining16X to 1X (6pin/ MOLEX/SATA Powered) LED Status Riser Adapter + 60cm USB 3.0 Cable (GPU Ethereum Mining)
  • - Upgraded Version: The Dracaena PCIE Riser is a high-performance PCI Express riser that can convert a PCIE X1 slot to a PCIE X16 slot on the mother board. With more PCIE X16 graphic cards, it will give a safe and dependable connection. Will be mainly used on Ethereum Mining rigs or GPU Mining rigs.
  • - Stable solution: The 60cm USB 3.0 extension cable is soft and flexible, making it simple to position and route. The operating state is shown by three LED lights. The slot has a fixed buckle that makes it easy to remove and replace the graphics card without it falling out.
  • - Simple extend PCI Express X1 slot from mother board to PCI Express X16 slot for heavy GPUs. Added fixed buckle on the PCI Express X16 slot ensure stable GPU connection.
  • - Power Supply Options: While other PCIE has only 1 option for power connector which is 6 pin power connector. Dracaena Riser provides 3 different options which are 6pin, Molex and SATA
  • - 3 Solid Capacitors improve power stability to GPU and prevent interference. Coil unit added for absorbing electromagnetic wave
Bestseller No. 10
BulletProof Mining Graphics Card PCIe Riser VER 009S 16x to 1x Powered Riser Adapter Card w/ USB 3.0 Extension Cable & 6-Pin PCI-E to SATA Power Cable | Bitcoin | Ethereum Mining
  • Mine Bitcoin, Etherium, Dogecoin, Shiba Inu coin! The crypto revolution is now!
  • Version 009S riser kits are the top of the line solution for setting up Ethereum mining rigs (or any other GPU-mined alt-coin)
  • 4 High Quality Solid Capacitors, Voltage Regulation, and
  • 60cm USB 3.0 riser cable enabling flexibility in the placement of your PCI-E devices. Overcurrent Protection. Gold plated contacts for flawless connectivity and a long lifespan.
  • 6-pin PCI-E power to 15-pin SATA power cable for direct connection to your power supply reduces the power burden on your motherboard and ensures maximum compatibility with your power supply.
Top-Products

Leave a Comment